The Free On-line Dictionary of Computing (30 December 2018):

addressing mode

   1.  One of a set of methods for
   specifying the operand(s) for a machine code
   instruction.  Different processors vary greatly in the
   number of addressing modes they provide.  The more complex
   modes described below can usually be replaced with a short
   sequence of instructions using only simpler modes.

   The most common modes are "register" - the operand is stored
   in a specified register; "absolute" - the operand is stored
   at a specified memory address; and "immediate" - the operand
   is contained within the instruction.

   Most processors also have indirect addressing modes, e.g.
   "register indirect", "memory indirect" where the specified
   register or memory location does not contain the operand but
   contains its address, known as the "effective address".  For
   an absolute addressing mode, the effective address is
   contained within the instruction.

   Indirect addressing modes often have options for pre- or post-
   increment or decrement, meaning that the register or memory
   location containing the effective address is incremented or
   decremented by some amount (either fixed or also specified in
   the instruction), either before or after the instruction is
   executed.  These are very useful for stacks and for
   accessing blocks of data.  Other variations form the effective
   address by adding together one or more registers and one or
   more constants which may themselves be direct or indirect.
   Such complex addressing modes are designed to support access
   to multidimensional arrays and arrays of data structures.

   The addressing mode may be "implicit" - the location of the
   operand is obvious from the particular instruction.  This
   would be the case for an instruction that modified a
   particular control register in the CPU or, in a stack based
   processor where operands are always on the top of the stack.

   2. In IBM System 370/XA the addressing mode bit controls
   the size of the effective address generated.  When this bit
   is zero, the CPU is in the 24-bit addressing mode, and 24 bit
   instruction and operand effective addresses are generated.
   When this bit is one, the CPU is in the 31-bit addressing
   mode, and 31-bit instruction and operand effective addresses
   are generated.

   ["IBM System/370 Extended Architecture Principles of
   Operation", Chapter 5., 'Address Generation', BiModal
   Addressing].

   (1995-03-30)